Edge Board Machine Manufacturers

Edge Board Machine Manufacturers

High Speed Paper Edge Board Making Machine Product Description Automatic Paper Corner Protector SANPPL-120G is one paper protector production line with speed of 50m/min. This line Can produce U and Flat type protector though changing moulds. Technical Specification G paper stand G gluing system...
Chat Now

Product Details

 High Speed Paper Edge Board Making Machine


Product Description
Automatic Paper Corner Protector SANPPL-120G is one paper protector production line with speed of 50m/min. This line Can produce U and Flat type protector though changing moulds.                  


Technical Specification

ModelSANPPL-120G
L protector size(mm)25-100 (can be symmetrical and assymetrical)
Thickness(mm)normally 3-6mm, special order for max thickness of 8mm
Applicable inner paper360-600g/m2 fluting paper or  corrugating medium paper
Applicable surface paper175-250gsm craft paper
Core diameter of paper roll3" (76mm) (4" or other size must be confirmed when making order)
Max. quantity of Layer13
Max. speed50m/minfor length not smaller than 800mm.
Control systemPLC, servo motor, Touch screen (HIM) with automatic alarm and failure notice, easy for operation and adjustment.
With output counting.
Paper standsSuspended stands with hoist for inner paper paper.  
Forming wheelschamber hanging type, easy to change moulds
Method to load paper rollLoad inner paper rolls by hoist (along with machine). Load surface paper roll by hydraulic manual car (buy by the buyer) which is also required to move jumbo paper roll. No need to stop machine when loading paper rolls.
Applicable paper roll diametermax. 1300mm
Paper feeding and compoundingStep type with complex structure
Gluing systemCascade type gluing system
Glue heatingelectrical heating with temperature control system
Glue feedingAutomatic feedingby diaphragm pump
Pressing adjustmentPneumatic pressing  to protect paper and easier operation
Protector heatingelectrical heating
Cut methodHydraulic cutting
Quantity of cutter1
Moving of cutting headservo motor controlled by PLC
Min cut length50cm
Cut tolerance± 1mm
StackerAutomatic stacking
Motor for forming sectiontwo motors with inverter, with high power, direct-connected reducing motor
Power supplyMotor power: 20KW
protector heating power: 6.5KW (normally for winter)
glue heating power: 4.5KW (normally for winter)
Air supply0.6Mpa, 0.1m3
Total weight(MT)4.5
Dimension(m)24.5× 2.3× 4
Operator2-3 workers
Required containerOne 40" container


G paper stand
1 paper stand
G gluing system

2 gluing

G forming system
6 forming


G cutting system
7 cutting

G automatic stacking system
9 stacking

Main Features

1) Suspended paper stand with buffering effect, replace the paper rolls with hoist, no need to stop the machine.
2) Automatic controller for glue temperature ensures the good quality even in low temperature.
3) Heating system for production line, makes the protectors more strong.
4) Molding wheels adopt box type suspended structure, easy to change mould.
5) Touch screen and human-machine interface of servo system, the operation is more humanized, the operation for adjust air cylinder is more convenient.
6) Automatic to alarm, malfunction, easy to adjust and maintain.
7)  Hydraulic cutting system, maximum frequency is 90 times/min.
8)  Automatic stacking system with counter.
9)  Through changing molds, it can produce U profile protector and Flat board. 

Our Service

One year guarantee for whole machine, all life follow-up service.

24 hours technical support by email.

Technicians oversea set-up and workers training.

Use- friendly English for operation system.


Packing & Delivery

Packaging Details:Film+ honeycomb board packing

Delivery Detail:Shipped in 30 days after payment



THE PACKING IS SEAWORTHY AND SAFE.


Inquiry